ICT Construction Caribe
Shaw
   

Shaw 1000 Superior Grade Carpet Adhesive is a is a fast-tacking, solvent-free, ultra premium adhesive for installing both direct glue down and double glue down commercial carpets and Shaw’s DuraTech Plus Cushion. This adhesive has been specially designed to provide quick grab with fast wet suction and holding power for bonding the most difficult to install carpet backing such as wide-pick Action Bac and heavily embossed Unitaries. Shaw 1000 can be used for smoother Action Bac, jute backings, the Enhancer (Urethane) backings, and Shaw DuraTech Plus carpet cushion. Extended residual tack and rebond qualities allow the installer to simply roll out bubbles should they occur. Use the tacky method of installation for all applications allowing adequate adhesive leg development before laying carpet or cushion into wet adhesive. This adhesive is recommended for use over American Plywood Association (APA) plywood or equal plywood, and all grades of fully cured concrete in the absence of hydrostatic pressure and high alkali. It is recommended that the installer perform tests for alkali (pH of floor should be 5-9). A moisture test should be performed using the Anhydrous Calcium Chloride method. Moisture emissions should not exceed 5 lbs. per 1,000 square feet per 24 hours.
 

Data Sheet

MSDS

Shaw_201000.jpg

Shaw 5000 is a pressure sensitive adhesive specifically formulated for the interior installation of Ecoworx Squares, Ecoworx 6’, Permabac Squares, and Ergoflex Squares. This acrylic based adhesive is non-flammable, water resistant, freeze/thaw stable and highly resistant to vinyl plasticizer migration. Shaw 5000 has good rebonding characteristics, is easy to use, and gives excellent coverage. Because Shaw 5000 is pressure sensitive, this adhesive eliminates concern about installing a non-porous carpet over a non-porous substrate. The dry installation method is required.
 

Data Sheet

MSDS

Shaw_205000.jpg