|
|
Koester Brochure
|
VAP I® 2000 is a 2 component, 100% solids, Epoxy-Based moisture vapor reduction system.
It is VOC compliant, moisture and pH resistant, and can block moisture vapor emissions from coming through a concrete slab
(on or below grade) from up to 25 lbs/1000 SF/24 hrs and can reduce levels to below the 3 lbs/1000 SF/24 hrs threshold established
by today's modern flooring systems. A 10 year labor and material warranty is our guarantee that we stand behind this tried
and tested product. Cure time is 12 hours and is compatible with most flooring systems.
Data Sheet
MSDS
Warranty
|
|
|
VAP I® 2000 FS is
a 2 component, 100% solids, Epoxy-Based moisture vapor reduction system. It is VOC compliant, moisture and pH resistant,
and can block moisture vapor emissions from coming through a concrete slab (on or below grade) from up to 25 lbs/1000 SF/24
hrs and can reduce levels to below the 3 lbs/1000 SF/24 hrs threshold established by today's modern flooring systems. A
10 year labor and material warranty is our guarantee that we stand behind this tried and tested product. VAP I® 2000
FS is virtually identical to the VAP I 2000 except it cures in 4 hours instead of 12 hours. This product was designed for
Fast Track Construction with the 24-hour-a-day-never-closing, retail stores in mind.
Data Sheet
MSDS
Warranty
|
|
|
VAP I® ORS C is a 2-component,
VOC Compliant, Low viscosity, High Solids Epoxy used in conjunction with the ORS Detergent to
coat concrete slabs contaminated with Oil Based Hydrocarbons. Cures in about 12 hours.
Data Sheet
MSDS
Warranty
|
|
|
VAP I® ORS D is
a Special detergent used in conjunction with the Oil Remediation System to remove hydrocarbons such as oil, grease, fat,
hydraulic fluid, etc.
Data Sheet
MSDS
Warranty
|
|
|
VAP-1 06 Primer
is a water-based one component resin system for priming absorbent and non-absorbent substrates such as Koester VAP I®
moisture mitigations systems, terrazzo, marble, ceramic and quarry tile prior to the installation of the LEVEL-PRO products.
Solvent free primer specifically designed to enhance the properties of the Level-Pro products providing maximum adhesion
between the substrate and the leveler.
Data Sheet
MSDS
Warranty
|
|
|
SB Bonding Emulsion is a carboxylated styrene
butadiene copolymer latex. It is designed to be used as an additive for Koester NB-1 as well as with hydraulic cements.
It imparts excellent improved protection from aqueous solution of salts, acids, and alkalis. The product is free of solvents,
plasticizers, and fillers, and provides a plastifying effect, which increases the elasticity and reduces water absorption
of cement based systems.
Data Sheet
MSDS
|
|
|
NB 1 Grey is a watertight, cementitious waterproofing
compound with crystallizing agents. Sealing with KOSTER NB 1 Grey provides excellent pressure and abrasion resistance.
Used for waterproofing new or old buildings. Primarily used for negative-side waterproofing.
Data Sheet
MSDS
|
|
|
